Kontakt  |  De  /  En  /  It

Jetzt Kontakt aufnehmen

WEBER ENTEC GMBH & CO. KG

Im Ermlisgrund 10
D-76337 Waldbronn

T +49 (0) 72 43/ 72 88 980
F ++49 (0) 72 43/ 76 55 011

mail@weber-entec.com

oder Kontaktformular abschicken
Kontaktanfrage erfolgreich versendet.

worldwide

More than 200 installed plants

referenzen

275 kW Biogas plant Rastdorf

Background
Because of his difficult substrate mixture, which had reduced fluidity caused by the high proportion of horse manure and of intermediate crops, the plant operator decided in favour of a preparation step using a disintegration plant from Weber Entec.

Result
The viscosity decreases perceptibly, the substrate is more homogeneous, and the addition of enzymes and trace elements has become superfluous. A lab test indicated an increase in efficiency of 20.5% in comparison to the untreated control.

250 kW Biogas plant Vreden

Background
The combined heat and power plant (CHP) was working at only 75% load (190 kW). The aim was to obtain a 100% load for the CHP. In addition, maize silage was to be successively replaced by more difficult substrates such as grass.

Result
Even just three months after commissioning the ultrasonic disintegration plant, the CHP achieved a load of 230 kW. In the meantime, the CHP is running at full load.

WWTP in Baden-Wurttemberg

Background
The aim of the waste water treatment plant was to increase the gas yield as well as to reduce the amount of sludge and as a result of that the disposal costs.

Result
A batchtest showed an increase of the gas yield of the treated thickened surplus sludge of 11.5%.

Biogas plant in Bavaria

Background
The biogas plant required to save substrate and increase the gas yield.

Result
After the installation of our ultrasound disintegration plant a 15 % higher methane yield and less needed substrate was verified.

800 kW Biogas plant in Baden-Wurttemberg

Background
The aim of the biogas plant was saving substrate and increasing the biogas yield.

Result
Now it is possible to get the same amount of methane with about 11 % less substrate.

1300 kW Biogas plant in Lower Saxony

Background
This biogas plant had the aim to save substrate as well as to increase the biogas yield.

Result
The carried out batch test showed an increase of efficiency of the ultrasound treated samples in comparison to the untreated samples of 13,5 %.

560 kW Biogas plant in Freiburg/Elbe

Background
The biogas plant was built to expand the crop rotation through the plantation of maize and grass. The ultrasound disintegration plant of Weber Entec shall increase the gas yield of the used substrates.

Result
The laboratory test yielded to an increase of the treated samples in comparison to the untreated samples of more than 10%. Note, that the sampling was carried out two month after installation and commissioning of the disintegration plant. It can be assumed that the real increase is higher than the measured increase.

513 kW Biogas plant in Lower Saxony

Backround
This biogas plant required to save substrate and increase the biogas yield.

Result
A lab test showed an increase of the biogas yield of more than 15%.

663 kW Biogas plant in Mecklenburg-Western Pomerania

Background
The aim of the plant was to increase the gas yield.

Result
The comparison of the treated and untreated samples showed an increase of efficiency of 14%.

Biogas plant in Rhineland-Palatinate

Background
The biogas plant wanted to save substrate and increase the gas yield.

Result
An independent laboratory confirmed that the gas yield was increased of more than 13 % and by that the efficiency was improved.